Forum

Register

If you have trouble registering then email support @ iforpowell.com and I can force things though.

The system is not that good but I prefer to spend my time working on IpBike than trying to set up an alternative. It is at least good at keeping the spam away.

It is advisable to 'copy' before you try and post as the captcha stuff is a bit to agresive and the back buttone is not working for everyone.  You can at least then paste and have another go.

Apps » IpBike » Problem COnnecting to Power Meter Pedals

Started by zorza Sep 01 2017, 23:50

zorza Posts: 6	Sep 01 2017, 23:50 So, I have a set os powermeter pedals, the powerta P1S. I had previoulsly the garmin vector2, and everything worked 100%. With these new powermeters, that also transmit in Ant+, I am having some problems. First, I have to manually go to ipsensorman and tap OPEN on the device, because when start sensors in IPBIKE, just before the start of the ride, IPsensorman does not "open" this device. Even after I have taped open on the device, and I see the tracking values on the screen of ipsensorman, when I switch to ipbike, the power and cadence values don't automaticly show. What is wrong here?
zorza Posts: 6	Sep 02 2017, 13:58 After a few hours, finaly got it to work. There is a small bug in ipbike. But let me explain. There was a time, I had two bikes. And so, I had to change bikes manually. This has been ok for one or two years. One month ago, I removed one of the bikes from IPBIKE, but continued to use the vector 2 pdals. All was ok. Yesterday, I removed the vector 2 pedals from ipbike and added the P1S pedals.. IPbike didn't knew if he shoudl add it to the bike or not, so I added it manually. And there was glitches all over!! I only got it to work, when i removed the checkbox from "Choose bike manually". So, there is no logitc in having a choice from bikes, when you only have one bike! I hope it helps..